How to Test a Used Game Console Before Buying
Buying a PS5, Xbox Series X|S or Nintendo Switch from eBay, CeX, Facebook Marketplace or a local listing? Work through this checklist with the console connected to a TV before you pay. The first three steps catch online bans and account problems that no repair can fix. Bring a game disc if it has a drive, and allow about thirty minutes, because the fan check needs a game running for a while.
-
Check the console is not banned from online services
Connect the console to the internet (a phone hotspot works) and open the store: PlayStation Store, Microsoft Store or Nintendo eShop. A banned Switch or Switch 2 cannot reach the eShop or play online, and Nintendo’s support pages list error codes 2124-4007 and 2124-4508 for a console whose online services are restricted. The ban is tied to the console, not the account, so a new account will not fix it. Sony and Microsoft can also ban consoles; any error on sign-in that the seller cannot explain is a reason to stop.
Checked on the console itself, no tool needed.
-
Get the seller’s account off the console
Ask the seller to sign out and reset the console in front of you. On a PS5, they should first turn off Console Sharing and Offline Play (Settings, Users and Accounts, Other), then reset under Settings, System, System Software, Reset Options. On a Switch, their Nintendo Account should be unlinked and the console deregistered as their primary console in the eShop, then reset with Initialise Console under System Settings, System, Formatting Options. A console left signed in to someone else’s account is a common sign it was not theirs to sell.
Checked on the console itself, no tool needed.
-
On an Xbox, remove it as the seller’s home Xbox
Go to Settings, General, Personalisation, My home Xbox and have the seller remove it as their home Xbox, then reset it under Settings, System, Console info, Reset console, Reset and remove everything. If they forget, they can also remove it later from the devices page of their Microsoft account, but it is easier to do it while you are both there.
Checked on the console itself, no tool needed.
-
Match the serial number to the box
The serial number is on a sticker on the console and in its settings: PS5 under Settings, System, System Software, Console Information; Xbox under Settings, System, Console info; Switch under System Settings, System, Serial Information. It should match the sticker on the box and any receipt. A box from a different console is a common way to make a stolen or refurbished unit look boxed and complete.
Checked on the console itself, no tool needed.
-
Confirm the model and storage match the listing
Check exactly which model you are getting: a PS5 with or without a disc drive, original or Slim, or a PS5 Pro; an Xbox Series X or the smaller Series S (no disc drive); a Switch, Switch OLED, Switch Lite or Switch 2. Look at free space in the storage settings, and on a Switch 2 note that Switch 2 games on a memory card need a microSD Express card. Older microSD cards only work for Switch 1 games and media.
Checked on the console itself, no tool needed.
-
Test the disc drive
If the console has a disc drive, bring a game or Blu-ray, insert it, play for a minute, then eject it. Listen for grinding or repeated clicking and watch for a disc that is not recognised. A PS5 Slim with the detachable drive needs an internet connection the first time the drive is paired, so a drive bought separately has to be set up online.
Checked on the console itself, no tool needed.
-
Check HDMI output and the ports
Connect the console to a TV with its own HDMI cable and confirm a clean picture at the expected resolution, with no flickering or dropouts when you move the cable. Plug a controller or USB stick into each USB port. On a Switch, dock and undock it several times: the picture should move to the TV every time, and a console that will not output from the dock may have a damaged USB-C port, a known risk with cheap third-party docks.
Checked on the console itself, no tool needed.
-
Listen to the fan under a real game
Fan and cooling faults rarely show on the home screen. Play a demanding game for fifteen to twenty minutes. A steady whoosh is normal; rattling, grinding, a fan that ramps to full speed and stays there, or a console that shuts itself down or warns about overheating are not. Feel the exhaust: it should be warm and flowing freely. Dust packed in the vents is a sign it was run hard and rarely cleaned.
Checked on the console itself, no tool needed.
-
Test the DualSense for stick drift
Connect the controller to your phone or laptop by USB or Bluetooth and open the drift test. Leave both sticks untouched and watch the readings: a stick that wanders off centre on its own is drifting. Also check the adaptive triggers resist properly in a game, since worn trigger motors are a common DualSense fault.
Open the PS5 controller drift test → -
Test the Xbox controller for stick drift
Connect the controller by USB or Bluetooth and leave the sticks at rest. Any movement in the readings with your thumbs off is drift. Push each stick in a full circle to check it reaches the edges in every direction.
Open the Xbox controller drift test → -
Test the Joy-Con for stick drift
Pair each Joy-Con with your phone or laptop over Bluetooth and test them one at a time. Joy-Con drift is very common on original Switch controllers. On the console itself, System Settings, Controllers and Sensors, Calibrate Control Sticks shows the same thing.
Open the Joy-Con drift test → -
Test every button and trigger
With the controller still connected, press every button, the d-pad and both triggers and confirm each one registers once, cleanly. Sticky, double-registering or dead buttons are cheaper to find now than after you pay.
Open the gamepad test → -
Check the Joy-Con rails and the Switch screen
On an original Switch, slide each Joy-Con on and off: it should click in firmly, not wobble, and the console should show it as attached. Switch 2 Joy-Con attach magnetically, so check they hold firmly and connect every time. In handheld mode, look at a white menu screen for dead pixels and drag a finger across the whole touchscreen to find dead zones.
Checked on the console itself, no tool needed.
Red flags: negotiate hard or walk away
- The store will not load, or an error appears when going online. On a Switch, error 2124-4007 or 2124-4508 means a banned console. Walk away. This is not negotiable.
- The seller will not sign out, remove the home Xbox or reset the console in front of you.
- The serial number on the console does not match the box.
- The seller will not let you connect it and run a game, or only shows it on the home screen.
- Grinding or rattling fans, overheating warnings or unexpected shutdowns.
- A disc drive that does not read or eject, or no picture from the Switch dock.
- Stick drift on the included controllers that the seller did not mention.
Frequently Asked Questions
How can I tell if a used Nintendo Switch is banned?
Connect it to the internet and open the eShop. A banned console cannot reach it, and Nintendo lists error codes 2124-4007 and 2124-4508 for restricted consoles. A new account does not fix it, so ask to see the eShop load.
What should the seller do before handing over a used Xbox?
Remove it as their home Xbox (Settings → General → Personalisation → My home Xbox), then reset it under Settings → System → Console info → Reset console.
How do I check a used console’s controllers for drift?
Connect the controller to a phone or laptop and open a browser drift test. If a stick reads off centre with your thumbs off it, it is drifting. Price a repair or replacement in.
Why should the serial number match the box?
A mismatch means the box belongs to a different console, a common way to dress up a stolen or refurbished unit as a boxed original.
How long does the full check take?
About thirty minutes, most of it running a game to check the fan. The ban, account and serial checks take a few minutes.
Only buying a controller? The controller drift test works with PlayStation, Xbox, Switch Pro and most PC controllers in the browser.