CPU Test
Measures how fast your processor works on one core and on all of them, then holds it at full load to see whether it slows down as it heats up. It cannot read the processor model or its temperature.
Something not working with this test? Report a bug
How to Run the Test
- Close other heavy programs and browser tabs, and plug in a laptop. On battery, many laptops limit the processor.
- Press Run benchmark. It tests one core for five seconds, then every core for five seconds.
- For a heat check, choose a length and press Start stress test. Three minutes is enough for most laptops, ten for a desktop with a large cooler.
- Keep this page visible until it finishes. Browsers slow down hidden tabs, which would spoil the reading.
Reading the Numbers
- Logical cores: how many tasks the processor can run at once, as the browser reports it. Hyper-threading and efficiency cores are included.
- Single-core speed: how fast one core runs the workload. It governs how snappy ordinary use feels.
- All-core speed: the total with every core busy. It matters for video export, compiling and games that use many threads.
- Multi-core gain: all-core divided by single-core. Half to three quarters of the core count is typical.
The unit is millions of operations of a fixed test workload per second. It has no meaning outside this page, so compare only between runs here, in the same browser.
What the Stress Test Shows
A processor that gets too hot lowers its own speed to cool down. That is thermal throttling. The chart plots speed over time, with a dashed line at the starting speed.
- A flat line: the cooling keeps up. This is what a healthy desktop or a well-cooled laptop does.
- A step down after a short burst: the processor used its turbo boost and settled. Normal on laptops, and usually 10 to 25 percent.
- A steady slide, or a drop of more than a quarter: the cooling is not coping.
- A sawtooth: the processor is bouncing off its temperature limit, speeding up and being cut back again.
If It Throttles Heavily
- Give it air. Use the laptop on a hard flat surface, not on a bed or your lap, and check that no vent is covered.
- Listen for the fan. Silence at full load on a laptop that has a fan means the fan has failed or is blocked. The fan test checks this with the microphone.
- Clean it. Dust in the fan and heatsink is the most common cause on a laptop more than two years old.
- Check the power mode. Battery saver and quiet modes cap the processor on purpose. Set the power mode to best performance and test again.
- Replace the thermal paste. On an older machine, dried paste between the processor and its heatsink causes exactly this pattern. A repair shop can do it.
Phones and fanless tablets always slow down under sustained load. That is by design, and a drop of a third after several minutes is not a fault on those devices.
What This Test Cannot Tell You
- The processor model. Browsers hide it. On Windows open Task Manager and the Performance tab; on a Mac open About This Mac. The system info test shows what the browser does reveal.
- Temperatures. No web page can read them. Use HWMonitor or Core Temp on Windows, or the built-in sensors command on Linux.
- A score you can look up. The numbers depend on the browser as well as the chip, so they are not comparable with Geekbench or Cinebench.
Buying a Used Laptop?
Run the benchmark, then a three-minute stress test, before you pay. A machine that loses a third of its speed within a couple of minutes needs cleaning at best. The used laptop checklist covers the battery, screen, keyboard and ports.
Frequently Asked Questions
Can a website test my CPU accurately?
It can measure speed on one core and on all cores, and whether that speed drops under load. It cannot read the model, temperature or clock speed. Use it to compare devices in the same browser, or one device before and after cleaning.
How do I know if my CPU is thermal throttling?
Run the stress test for at least three minutes with the page visible. Within about 10% of the starting speed is fine, 10 to 25% is mild throttling, and more than 25% means the processor is being held back hard to control its temperature.
Why is the multi-core gain lower than my number of cores?
Hyper-threading counts each physical core twice, many chips mix fast and slow cores, and running everything at once lowers the clock speed. Half to three quarters of the core count is typical.