PS5 Controller Drift Test
Connect your DualSense to a computer by USB-C or Bluetooth, press any button, then let go of both sticks. The meter shows the raw resting position of each stick. The PS5 itself has no way to show you this.
Your browser does not report a standard layout for this controller, so the stick axes cannot be identified reliably and no drift verdict is shown. Try this page in Chrome or Edge.
Something not working with this test? Report a bug
How to Connect a DualSense
- USB: use a USB-C cable that carries data. Many phone charging cables do not, and the controller will charge but never appear.
- Bluetooth: with the controller off, hold the PS and Create buttons until the light bar flashes, then pair it from your computer's Bluetooth settings.
- Browser: Chrome and Edge read the DualSense most reliably. If nothing appears, press a button, since browsers hide controllers until they receive input.
Unplug or switch off any other controller first, otherwise the meter may read the wrong pad.
What Counts as Drift on a DualSense
- Under 5%: normal. PS5 games apply a deadzone that hides this completely.
- 5–10%: early wear. Usually invisible in games, but it tends to grow, and it shows in shooters where you lower the deadzone.
- Over 10%: real drift. Expect the camera or your character to creep on its own.
The flick-release test matters more than a single reading: a healthy DualSense returns to roughly the same point every time, while a worn module lands somewhere different after each release.
Fixing DualSense Drift, Cheapest First
- Update and re-pair. Update the controller from the PS5 (Settings, Accessories, Controllers) and re-pair it, to rule out a software fault.
- Clean the stick base. Switch the controller off, lift the rubber skirt, and rotate the stick while applying a little 90%+ isopropyl alcohol on a cotton swab. Let it dry completely.
- Claim the warranty. Drift is treated as a defect in warranty. Check Sony support for your region's terms, and in the EU or UK you can also go to the retailer under the statutory guarantee. Don't open the controller first.
- Replace the module. Out of warranty, a hall-effect or TMR replacement module stops the drift from coming back, but fitting one into a standard DualSense means desoldering. The DualSense Edge takes replacement modules without tools.
Buying a Used PS5 Controller?
Drift is the most common fault on second-hand DualSense pads, and it is invisible in a listing photo. Run this test on both sticks before paying, then the gamepad test for buttons, triggers and the touchpad click. If you are testing other pads too, the general controller drift test explains the mechanism in depth.
Frequently Asked Questions
Does the PS5 have a built-in stick drift test?
No. There is no screen on the PS5 that shows raw stick values. Reading the raw axes on a computer shows drift long before it is big enough to move anything in a game.
Will Sony fix DualSense stick drift for free?
In warranty, yes. Drift counts as a defect. The period and who pays postage vary by region, so check Sony support for your country. In the EU and UK the retailer's statutory guarantee is a second route. Don't open the controller before claiming.
Does the DualSense Edge get stick drift?
Yes, but its modules swap without tools. Swap left and right: if the drift follows the module, replace the module; if it stays on the same side, the board is at fault.
Can cleaning fix PS5 controller drift?
If dust or residue is the cause, yes. If the drift comes back within days the track is worn, and the module needs replacing.
How do I check a used PS5 controller before buying?
Test both sticks here at rest and after flick-release, then check every button, both adaptive triggers and the touchpad with a gamepad tester. Ask whether it has been opened, since resold pads often have aftermarket sticks.