Joy-Con Drift Test
The quickest Joy-Con check is on the Switch itself: System Settings → Controllers and Sensors → Calibrate Control Sticks. For a numeric reading, pair a Joy-Con or Pro Controller to a computer over Bluetooth, press a button, and let go of the stick.
Your browser does not report a standard layout for this controller, so the stick axes cannot be identified reliably and no drift verdict is shown. Try this page in Chrome or Edge.
Something not working with this test? Report a bug
Test 1: The Switch’s Own Stick Screen
- Open System Settings, then Controllers and Sensors, then Calibrate Control Sticks.
- Push the stick you want to check to select it, then take your thumb off.
- The marker should sit dead centre and stay still. Off-centre or creeping means drift.
- Move the stick in a full circle. It should reach the edge smoothly in every direction.
If the centre is off, run the on-screen calibration. A stick that still wanders afterwards is worn, not miscalibrated. On a Switch 2, the stick calibration is also under System Settings in the controllers section.
Test 2: Raw Reading on a Computer
Pair the Joy-Con or Pro Controller to a PC or Mac over Bluetooth (hold the small sync button on the rail, or on top of the Pro Controller, until the lights run), open this page in Chrome or Edge and press a button. The meter above shows the peak distance from centre while you are not touching the stick.
- Pro Controller: reports like any standard pad, so both meters are accurate.
- Single Joy-Con: pairs as its own sideways device with a non-standard layout, so its one stick may appear on either meter, with directions swapped. The resting percentage is still meaningful; the Switch screen above is the more reliable check.
Under 5% at rest is normal, 5–10% is early wear, over 10% is drift you will notice in games.
Get It Repaired by Nintendo First
Joy-Con drift is common enough that Nintendo has repaired drifting Joy-Cons free of charge in many regions, including out of warranty, and it takes Joy-Con 2 repair requests through its support site. Terms differ by country and exclude damage from modification or impact, so check your regional Nintendo support site before paying anyone else, and do it before opening the controller, which can rule out a free repair.
Fixing It Yourself
- Recalibrate on the Switch, as above.
- Update the console and controllers (System Settings, Controllers and Sensors, Update Controllers).
- Clean under the rubber stick skirt with a little 90%+ isopropyl alcohol on a cotton swab, rotating the stick, then let it dry.
- Replace the stick module if nothing else works. Replacement modules are cheap, including hall-effect versions that do not wear, but the repair involves fragile ribbon cables.
Buying Used Joy-Cons?
Ask to see both sticks on the Calibrate Control Sticks screen before paying, slide each Joy-Con on and off the console rails to check the lock, and press SL and SR. If you are buying other controllers as well, the general drift test explains what the readings mean and the gamepad test checks every button.
Frequently Asked Questions
How do I check my Joy-Cons for drift?
System Settings → Controllers and Sensors → Calibrate Control Sticks. With your thumb off, the marker should stay dead centre. For a numeric value, pair the Joy-Con to a computer and use the meter here.
Does Nintendo repair Joy-Con drift for free?
In many regions yes, even out of warranty, and Joy-Con 2 repairs can be requested through Nintendo support. Terms vary by country, so check your regional support site first.
Can I fix Joy-Con drift myself?
Recalibrating and cleaning can help. A worn stick needs a new module. That is a fiddly repair, and opening the Joy-Con can rule out a free Nintendo repair, so try Nintendo first.
Why do Joy-Cons show odd readings in a browser?
Each Joy-Con pairs as a separate sideways device with a non-standard layout, so its stick can appear on unexpected axes. The resting value is still useful, but the Switch screen is more reliable. The Pro Controller reads normally.
How should I check used Joy-Cons before buying?
Look at both sticks on the Calibrate Control Sticks screen, move each in a full circle, test the rail lock and press SL and SR.