How to Test a Used Android Phone Before Buying

Buying a Samsung Galaxy or Google Pixel from eBay, Swappa, Back Market or Facebook Marketplace? Work through this checklist with the phone in your hand before you pay. The first three steps catch the account locks and IMEI problems that make a phone worthless. The rest runs free in your browser, in about fifteen minutes total. Menu names move around between Android and One UI versions, so look for the nearest match.

  1. Check the Google account is removed (Factory Reset Protection)

    Android ties a phone to the last Google account signed in to it. If the phone is reset while that account is still on it, Factory Reset Protection asks for that account’s password at setup and the phone is useless without it. Before paying, have the seller remove their Google account (Settings, then Accounts or Passwords and accounts, depending on the version) and then factory reset the phone in front of you. If setup asks you to verify a previous account, walk away.

    Checked on the phone itself, no tool needed.

  2. On a Galaxy, check the Samsung account and Find My Mobile

    Samsung phones have a second lock. With Reactivation Lock on, a Galaxy stays locked to the seller’s Samsung account even after a reset. Find My Mobile lives under Settings, Security and privacy, Lost device protection on recent One UI versions (Biometrics and security on older ones). Ask the seller to turn it off and remove their Samsung account under Settings, Accounts and backup, Manage accounts, before the reset.

    Checked on the phone itself, no tool needed.

  3. Check the IMEI and the carrier lock

    Dial *#06# to show the IMEI and check it matches the one in Settings, About phone and on the box. Run it through a free IMEI checker for lost, stolen or blacklisted status: a blacklisted phone cannot use any mobile network. Then put your own SIM in and make a call, which is the quickest proof the phone is not locked to another carrier. On carrier-financed phones, look for a device lock or payment app that the seller cannot remove.

    Checked on the phone itself, no tool needed.

  4. Confirm the model and storage match the listing

    Settings, About phone shows the model name and model number (Samsung numbers start with SM-), and Settings, Storage shows the capacity. Check the model number belongs to the region and variant you were promised, because some regional Galaxy variants use a different chip and not every model supports every network band.

    Checked on the phone itself, no tool needed.

  5. Check the battery health

    On a Galaxy, open the Samsung Members app, then Support (or Get help), Phone diagnostics, Battery status. It rates the battery as Normal, Good or Weak; some recent flagships on newer One UI versions also show a capacity percentage and cycle count. On a Pixel 8a or later, Settings, Battery, Battery health shows the status and an estimated capacity, and Settings, About phone, Battery information shows the cycle count. Older Pixels (up to the 8 and 8 Pro) do not report health, so watch how fast the charge drops while you test. The battery test shows the live charge level and whether the charger is detected.

    Open the battery test →
  6. Check the OLED screen for burn-in

    Pixels and Galaxy S, Z and most A models use OLED panels, which can burn in; some budget Galaxy models use LCD. Use flat grey at moderate brightness in a dim room and look for a faint keyboard outline, a navigation bar along the bottom or a status bar along the top. Burn-in is permanent and on curved or folding screens it is an expensive repair.

    Open the burn-in test →
  7. Inspect the screen for dead pixels and tint

    Fill the screen with solid colours to catch dead or stuck pixels, green or pink tint and lines. A thin green or pink vertical line is a known OLED fault on some models and tends to get worse.

    Open the dead pixel test →
  8. Test the whole touchscreen

    Drag across every part of the display, including the curved edges where present, to find dead zones. Cheap replacement screens often leave an unresponsive strip along one edge.

    Open the touchscreen test →
  9. Test multi-touch

    Put several fingers down at once. Failed multi-touch breaks pinch-to-zoom and gesture navigation.

    Open the touchscreen test →
  10. Test the fingerprint sensor

    Enrol one of your own fingerprints in Settings and unlock with it several times. In-display sensors on Pixels and Galaxies often stop working after a non-genuine screen replacement, so a sensor that fails here is also a sign the screen has been changed.

    Checked on the phone itself, no tool needed.

  11. Test the cameras

    Check the front camera here, then open the Camera app and switch through every rear lens and zoom level. Look for dust or condensation behind the glass, a lens that will not focus and a cracked camera cover.

    Open the camera test →
  12. Test the microphone and speakers

    Record and play back to check the microphone, then use the audio test for both speakers (the earpiece doubles as the second speaker on most models). Muffled or crackling sound is often the first sign of water damage.

    Open the microphone test →
  13. Test the vibration motor

    Confirm the vibration motor fires and sounds clean, not rattly. A dead motor means no silent alerts and no haptic feedback when typing.

    Open the vibration test →
  14. Test the flashlight

    Switch the light on and run the blink test. It should come on at once and every flash should be equally bright. The flashlight shares its LED with the camera flash, so a dead or flickering light also means no flash photos.

    Open the flashlight test →
  15. Check the motion sensors

    Rotate the phone and confirm the readings follow; the accelerometer and compass tests cover the other sensors. Failed sensors break auto-rotate, maps and camera stabilisation, and they are a common result of a hard drop. On many Galaxy models, dialling *#0*# opens Samsung’s built-in test menu for the sensors, touch and vibration, though some carrier models disable it.

    Open the gyroscope test →
  16. Check the charging port

    Plug in a charger and wiggle the cable gently: charging should not cut in and out. Look inside the USB-C port for lint, corrosion or bent pins. A Galaxy that shows a moisture warning when the port is dry may have water damage inside.

    Checked on the phone itself, no tool needed.

Red flags: negotiate hard or walk away

  • The seller will not remove their Google or Samsung account and reset the phone in front of you. Walk away. This is not negotiable.
  • Setup asks you to verify a previous Google account after the reset.
  • The IMEI comes back lost, stolen or blacklisted, or does not match the box.
  • Your SIM does not work, or a carrier payment or device lock app cannot be removed.
  • Visible burn-in, or a green or pink line on the screen.
  • A fingerprint sensor that will not enrol, which often means a non-genuine screen.
  • The seller will not let you spend fifteen minutes with the phone before paying.

Frequently Asked Questions

What is FRP lock on a used Android phone?

Factory Reset Protection ties the phone to the last Google account on it. Reset without removing that account and setup demands the old password. Have the seller remove their account and reset the phone while you watch.

How do I check the battery health of a used Samsung Galaxy?

Samsung Members → Support (or Get help) → Phone diagnostics → Battery status. It rates the battery Normal, Good or Weak. Some recent flagships also show a capacity percentage, depending on the One UI version.

Can I see battery health on a used Google Pixel?

On a Pixel 8a or later: Settings → Battery → Battery health, with the cycle count under Settings → About phone → Battery information. Older Pixels, including the 8 and 8 Pro, do not show it.

How can I tell if a used Android phone is stolen or carrier locked?

Dial *#06# for the IMEI and run it through a free IMEI checker. Then put your own SIM in and make a call to rule out a carrier lock.

How long does the full check take?

About fifteen minutes. The account, IMEI and SIM checks take a few minutes and should never be skipped.