Dead Pixel Policies by Monitor and Laptop Brand
Found a dead or bright pixel on a new monitor or laptop? Whether you can send it back depends on two separate things: the retailer’s return window, which is often the easy route, and the manufacturer’s pixel policy, which decides warranty claims after that. This page explains the pixel classes, lists what each major brand publishes, and walks through how to claim.
Dead, bright and stuck pixels
Each pixel on an LCD or OLED panel is made of red, green and blue subpixels. A dead pixel or subpixel stays dark on every colour. A bright (hot) one stays lit and is easiest to see on black. A stuck one stays a single colour. Bright faults are much more noticeable, so most policies allow fewer of them. Policies also usually count subpixels, so one stuck red subpixel is one fault.
ISO 9241-307 pixel classes
ISO 9241-307 is the international standard for flat panel quality that replaced ISO 13406-2. It defines pixel fault classes: Class 0 allows no faulty pixels or subpixels, and each higher class allows more, counted per million pixels and split by type (always-on pixels, always-off pixels and faulty subpixels), with limits on faults that cluster together. A panel meeting a class is not a warranty promise. What decides a claim is the manufacturer’s own policy, which is usually written as a simple count of bright and dark faults.
Return window vs manufacturer warranty
The retailer’s return window is set by the shop you bought from, and many accept a return for a defect without checking it against any pixel threshold. The manufacturer warranty runs for longer, but the brand will only replace a panel when the faults exceed its policy. So test a new screen the day it arrives, and if you find anything, use the return window first.
-
Confirm the fault with solid colour screens
Fill the screen with black, white, red, green and blue in turn. A pixel that stays dark on every colour is dead; one that stays lit on black is a bright (hot) pixel; one that stays a single colour is stuck. Clean the screen first, because dust on the surface looks very similar.
Open the dead pixel test → -
Count the faulty pixels and note where they are
Write down how many faults there are, whether each is bright or dark, and roughly where on the screen. Brand policies count bright and dark faults separately, often count subpixels rather than whole pixels, and some treat faults in the centre of the screen more strictly than faults near the edge.
Use the colour screens → -
Photograph the fault
Take one photo of the whole screen showing where the fault is, and a close-up of the pixel on the colour that shows it best. Turn off the room lights and the phone flash so the photo is not washed out. A photo of the model and serial number label helps too.
Done away from the screen, no tool needed.
-
Check the policy for your model
Find the pixel policy for your brand in the table below, then check the terms for your exact model and country. Within one brand, premium lines often have stricter guarantees (such as zero bright dots) than budget lines.
Done away from the screen, no tool needed.
-
Contact the retailer first, inside the return window
If you are still inside the retailer’s return window, start there. Many retailers accept a return for any reason, or for a defect, without counting pixels against a manufacturer threshold. Online purchases in the EU and UK also carry a 14-day right to cancel.
Done away from the screen, no tool needed.
-
Then make a warranty claim with the manufacturer
After the return window, contact the manufacturer’s support with the model, serial number, proof of purchase and your photos. If the fault count meets their policy, they usually replace or repair the panel, sometimes with a refurbished unit. If it does not, ask whether a goodwill exchange is possible, and in the EU and UK consider your statutory rights against the seller.
Done away from the screen, no tool needed.
Pixel policies by brand
Checked in November 2026 on each brand’s own support pages. Where we could not find or verify a current official policy, the table says so rather than guessing a number.
| Brand | What the policy covers | Where to find it |
|---|---|---|
| Dell | Premium Panel Exchange on covered monitors (UltraSharp, P, S 2020 and newer, gaming and most Alienware models): zero bright pixels or subpixels, up to 5 dark subpixels on most models, for the whole warranty period. Laptops at HD+ or higher: zero bright, up to 5 dark subpixels. | Dell Display Pixel Guidelines |
| LG | LG says different pixel policies apply to different models. We could not verify a current official threshold. Check the warranty terms for your model. | LG support for your country, with the model and serial number |
| Samsung | We could not find a current official pixel policy. Check the warranty terms for your model. | Samsung US warranty page, or Samsung support for your country |
| ASUS | US and Canada non-ZBD monitor warranty card: service for over 3 bright dots or 5 dark dots during the 3-year warranty. Zero Bright Dot (ZBD) models and some regions have stricter terms. | The Warranty tab on your monitor’s page at ASUS support |
| Acer | Zero Bright Dot policy: a display may be replaced during the limited warranty if bright dots exceed the allowed number. Dark dots are not covered by that policy. Check the warranty terms for your model. | Acer Zero Bright Dot policy |
| MSI | We could not verify a current official policy; MSI has run regional zero-dot promotions on some models. Check the warranty terms for your model. | MSI support for your country |
| BenQ | Covers faults that exceed BenQ’s defect specification, set by resolution: for FHD, QHD and UHD panels, up to 2 bright, 5 dark and 5 total subpixel faults are within spec (Asia Pacific page). ZBD models are stricter. Terms vary by region. | BenQ dead pixel policy for your region |
| HP | HP publishes a pixel policy for its monitors in which the allowed faults depend on the date of manufacture shown on the label. Check the warranty terms for your model. | HP monitor pixel policy |
| Lenovo | Separate policies for ThinkVision monitors, ThinkPad laptops, and IdeaPad, ThinkBook and Lenovo laptops and tablets. We could not load the current tables. Check the warranty terms for your model. | Monitors, ThinkPad |
| Apple | Apple does not publish a number. It says pixel anomalies can occur in a small percentage of panels and asks you to have the product evaluated by Apple or an authorised provider. | About LCD display pixel anomalies |
Policies change and vary by model and country; check yours. The same brand can have stricter terms for premium lines, different terms for laptops and monitors, and different terms in each region. Your model’s warranty document or support page is what counts.
In the EU and UK: your rights against the seller
- Statutory consumer rights apply against the seller, whatever the manufacturer’s pixel policy says. A pixel policy cannot remove them.
- If a screen is not of the quality a reasonable buyer would expect for that product and price, you can ask the seller for a repair, replacement or refund.
- In the UK, you have 30 days to reject faulty goods for a full refund. In the EU, the seller is responsible for faults present at delivery for at least two years.
- Online purchases in both the EU and the UK also come with a 14-day right to cancel, with no reason needed.
- Whether a handful of pixel faults counts as a defect depends on the circumstances, so put your case to the seller in writing, with photos.
Frequently Asked Questions
How many dead pixels before I can return a monitor?
Inside the retailer’s return window, often none. After that it depends on the brand and model: for example Dell allows zero bright and up to 5 dark subpixels on Premium Panel Exchange monitors, and the ASUS US and Canada card allows service for over 3 bright or 5 dark dots. Check your model.
What is the difference between a dead, bright and stuck pixel?
Dead stays dark on every colour, bright stays lit and shows on black, stuck stays one colour. Bright faults are usually treated more strictly.
What is ISO 9241-307 pixel class?
The standard that replaced ISO 13406-2 for counting pixel faults. Class 0 allows none; higher classes allow more per million pixels, by fault type. The brand’s own policy is what decides a claim.
Can a stuck pixel be fixed?
Sometimes it recovers on its own or with a flashing-colour tool; a dead pixel almost never does. Do not press on the panel, and do not let the return window run out while you try.
Do EU and UK consumer rights override a dead pixel policy?
Your rights are against the seller, and a pixel policy does not remove them. UK buyers have 30 days to reject faulty goods; in the EU the seller is responsible for faults present at delivery for at least two years.
Run the dead pixel test on any screen in your browser. Buying second-hand instead? The used monitor checklist adds backlight bleed, burn-in and refresh rate checks.