How to Check Used AirPods Before Buying (and Spot Fakes)
AirPods are among the most counterfeited electronics on marketplaces, and good fakes pair with an iPhone and show the familiar battery pop-up. Bring your own iPhone, pair them before you pay, and work through this checklist. The serial and Find My checks come first, because they catch fakes and AirPods you cannot use. Allow about fifteen minutes, longer if you can test the battery properly.
-
Compare the serial number on the case with Settings
Open the case lid: the serial number is printed on the underside of the lid. Pair the AirPods with your own iPhone, then open Settings, Bluetooth and tap the info button next to the AirPods (on recent iOS versions the AirPods also appear near the top of Settings while connected). The serial shown there should match the lid. A mismatch means the case and buds did not start out together, or that something is fake.
Checked with your iPhone and the AirPods themselves, no tool needed.
-
Run the serial through Apple’s coverage check
Enter the serial at checkcoverage.apple.com. It should return the exact model the listing claims (for example AirPods Pro 2 with USB-C, not an older generation) and a purchase or coverage status. An invalid serial is a strong sign of a fake. A valid one is not proof of a genuine product, because counterfeiters copy real serial numbers from boxes and listings, so keep checking.
Checked with your iPhone and the AirPods themselves, no tool needed.
-
Check the firmware version
On the same AirPods info screen in Settings, read the firmware version. Compare it with Apple’s firmware updates page for that model. Genuine AirPods normally run a recent version, while fakes often show an odd version, a missing field, or settings that do not match the model (for example no noise control options on AirPods Pro).
Checked with your iPhone and the AirPods themselves, no tool needed.
-
Make sure they are removed from the seller’s Find My
AirPods are linked to the owner’s Apple Account through Find My, and while they are, you cannot add them to your own account. The seller must open Find My on their iPhone, iPad or Mac, select the AirPods and choose Remove This Device. Unpairing them in Bluetooth settings is not enough. Then reset them (on most models, hold the setup button on the case for about 15 seconds until the light flashes amber, then white) and pair them to your iPhone. If your Find My shows them as paired to another Apple Account, the seller has not removed them. Apple cannot remove this lock for you.
Checked with your iPhone and the AirPods themselves, no tool needed.
-
Check the battery of each bud and the case
With the lid open next to your iPhone, the pop-up card and the Batteries widget show the charge of the left bud, right bud and case separately. iOS does not show a battery health percentage for AirPods, so the real test is listening time: charge both buds fully and, if you can, play audio for 30 minutes and see how far each drops. One bud draining much faster than the other is the most common sign of a worn battery. Compare with Apple’s rated listening time for that model.
Checked with your iPhone and the AirPods themselves, no tool needed.
-
Test each bud on its own
Put in only the left bud, play audio and use the controls (press or squeeze the stem, or tap, depending on the model). Then do the same with only the right bud. Each should connect, play and respond by itself. Check that ear detection pauses playback when you take a bud out, if it is switched on.
Checked with your iPhone and the AirPods themselves, no tool needed.
-
Check left and right channels and sound quality
With both buds in, play the left and right test tones from your phone or a laptop. Each tone must come from the correct side only. Then play a frequency sweep and some music at moderate volume, listening for crackling, a quieter side, or distortion. A muffled bud is often blocked mesh rather than a fault, so look at it before deciding.
Open the audio test → -
Test noise cancellation and transparency
On models that have them (AirPods Pro, AirPods Max and the AirPods 4 version with Active Noise Cancellation), switch between Noise Cancellation, Transparency and Off from the stem or from Control Center. In a noisy room the difference should be obvious. A buzzing, whistling or crackling sound with noise cancellation on, especially in one bud, is a known fault and a reason to walk away.
Checked with your iPhone and the AirPods themselves, no tool needed.
-
Test the microphone
Record a short Voice Memo on your iPhone with the AirPods in, then play it back; or connect them to a laptop and use the browser microphone test. Each bud has its own microphones, so try a recording with only the left bud in and then only the right.
Open the microphone test → -
Check the charging case
Plug the case in with a cable and check the status light comes on. If the listing says MagSafe or wireless charging, put it on a charger and check it starts charging. Close and open the lid a few times: the hinge should be firm, the magnets should hold the lid shut and pull the buds into place, and both buds should start charging when they are seated. Look for corrosion on the metal contacts.
Checked with your iPhone and the AirPods themselves, no tool needed.
-
Inspect the ear tips and hygiene
Look closely at the speaker mesh and the stems. Earwax build-up in the mesh lowers volume and is a hint the AirPods were not cared for. On AirPods Pro, check the silicone ear tips are present, not torn, and ideally replaced, and that the right sizes are included. Plan to clean everything before use, and treat replacement tips as part of the cost.
Checked with your iPhone and the AirPods themselves, no tool needed.
Red flags: negotiate hard or walk away
- The AirPods are still in the seller’s Find My, or show as paired to another Apple Account. Walk away.
- The serial in Settings does not match the case lid, and the seller cannot explain it.
- The coverage check rejects the serial or returns a different model.
- An odd or missing firmware version, or settings that do not match the model.
- One bud drains much faster than the other.
- Crackling or buzzing with noise cancellation on.
- A price far below the usual used price for that model, or a sealed box from a private seller.
Frequently Asked Questions
How can I tell if used AirPods are fake?
Compare the serial in Settings with the one under the case lid, check it at checkcoverage.apple.com for the right model, and check the firmware version. Counterfeiters copy real serials, so look for several matching signs, not just one.
Do AirPods have Activation Lock?
Not by that name, but they are linked to the owner’s Apple Account through Find My, and you cannot add them to yours until the seller uses Remove This Device in Find My. Unpairing in Bluetooth is not enough, and Apple cannot remove it for you.
How do I check the battery health of used AirPods?
iOS does not show a health percentage for AirPods. Charge them fully, play audio for a while and watch each bud drain in the Batteries widget. A big left and right difference usually means a worn battery.
Can I buy a single replacement AirPod or a case?
Yes, through Apple’s service, with pricing by model and AppleCare status. That is why mismatched serials are common. A genuine replaced part is fine, but price the set accordingly.
Is it hygienic to buy used AirPods?
With cleaning, yes. Check the mesh for earwax, clean as Apple describes, and replace the ear tips on AirPods Pro. Wax packed into the mesh can permanently lower the volume.
Buying the iPhone too? The used iPhone checklist covers Activation Lock, battery health and Parts and Service History.